Transformer Manufacturing
Marine type-approved transformers
SMALLER.
LIGHTER.
SMARTER.
ADVANCED
INDUSTRIAL DESIGN
With the use of specialized software of high precision, we design our transformers by comparing and evaluating alternative manufacturing strategies for each application.
Thus, we ensure and document the optimal quality-cost relation of our products, prior to the beginning of the production process.
LOW ENERGY
LOSSES
By applying innovative winding techniques, special air ducts are created between the coils ensuring the free dissipation of the heat and the low operating temperature of our transformers.
In addition, with the use of a core of low losses, energy losses are minimized up to 1%.
SMALLER DIMENSIONS.
LOWER WEIGHT.
HIGHER FLEXIBILITY.
The combined use of top-quality raw materials reduces the requirements in terms of space and weight, while at the same time, keeps the quality of the transformers at high levels.
By applying innovative winding conductors, we eliminate the empty spaces created during the winding process.
TRANSFORMERS >150KVA
9 POINTS OF SUPERIORITY
-
Smart Enclosure Design
The smart design with special ventilation openings and hidden spots inside the enclosure provides a high protection level and the necessary ventilation for achieving energy saving.
-
Design with air ducts
The smart design provides internal air ducts in order to achieve the necessary ventilation and the low operating temperature, even during temporary load fluctuations.
-
Limited heat losses
Special high-current cable terminations prevent thermal losses and enhance the performance of the transformers.
-
Cables mechanical support
The special cable routing design with mechanical support eliminates the danger from possible current leakage and the progressing loosening.
-
Safe transport
The lifting lugs on the transformer minimize the human effect during transportation and provide protection against labor (industrial) accidents, damage to equipment, or deformation of the enclosure.
-
Easy cover removal
The easy removal and re-positioning of the surfaces of the enclosure, provide full and convenient access, make installation easier, and reduce the required maintenance duration.
-
Smaller dimensions. Lower weight.
Leading-edge foil technology eliminates the gaps created during winding and minimizes the size and weight of the transformer in relation to its power.
-
Long lifetime
The low operating temperatures minimize the stress on insulation material and extend the lifetime of the transformer.
-
High endurance
The high-standards encapsulation, the special specification paint, and the special process of metallic parts for rust protection provide high endurance against hard environmental conditions (humidity, temperature) in marine applications.
SAFETY OR
CERTIFIED SAFETY?
-
Certified raw materials of top quality and insulation by branded European producers
-
Transformers certified, following regular inspections based on the strictest international standards
-
Full quality control with the strictest specifications to all final items, one by one
-
Written official power of the transformers correspond fully to the actual power
10 YEARS
GUARANTEE
10 YEARS
GUARANTEE
YOUR ACCESS
TO INFORMATION WEALTH
Power Quality Systems
COMPLETE POWER QUALITY SYSTEMS
Due to the increasing use of electronics and automation systems, an ever-increasing number of electrical installations are facing power quality problems.
ELIMINATION OF HARMONICS
The increasing use of technological equipment results in the appearance of harmonics in industries, marine, hospitals, renewable energy projects, and buildings.
Equipment strains and damages, increased maintenance costs, unforeseen production outages, destruction of sensitive electronic devices, increased thermal losses, energy or fuel consumption, are only some of the most serious consequences of harmonics.
With the use of active filters, harmonics are eliminated at their creation before entering the network; as a result, the electrical installations are protected against undesired and harmful consequences.
VOLTAGE STABILIZATION
Voltage fluctuations cause various problems. They increase the total energy consumption, maintenance costs, and may even destroy sensitive electronic equipment or create various malfunctions (shutdowns, strains, wear, etc).
The stabilization of voltage - regardless of the inevitable fluctuations of the input of voltage - is a critical factor for the smooth operation of each electrical installation.
Depending on the needs of your application, we recommend a suitable type of voltage stabilizer, ensuring the reliability and efficiency of your electrical installations.
SAG COMPENSATION
More than 60% of the equipment maintenance costs to achieve power quality are caused by voltage dips and small power outages. Voltage dips (or SAGs) are the instant, long in RMS value, and short-term voltage drops.
SAGs and small power outages are the main causes of poor power quality. They burden and put the equipment (automated and electronic systems, inverters, data processing, and control equipment) at risk.
With SAG compensators, you protect your equipment against endless voltage imperfections; effectively and economically.
POWER QUALITY.
PROTECTION OF EQUIPMENT.
EFFICIENT OPERATIONS.
End-to-end high added-value services at all stages of implementation.
-
Supply of Equipment
Supply and installation of the equipment based on the outcomes of the engineering study and the special requirements identified.
-
Commissioning
Commissioning of equipment, execution of controls and tests, detection of possible installation errors, and real measurements following the activation of equipment.
-
Maintenance
Comprehensive maintenance program for power quality equipment executed by specialized technical staff based on detailed user and service manuals.
-
Technical Support
Unparalleled technical support for all our products with technical solutions and advice, use of new implementation technologies, updated measurements, test records, and provision of spare parts.
POWER QUALITY
A MULTI-DIMENSIONAL PHENOMENON
Learn more about the causes, consequences, and alternative solutions to the problems of poor power quality.
DO YOU HAVE ANY QUESTIONS?
Contact
CONTACT
US
if you want to discuss your own needs
or have any questions.
- Αndrea Metaxa 11, Kifisia 14564, Attica
- +30 210 3460222
- +30 210 3460562
- This email address is being protected from spambots. You need JavaScript enabled to view it.
- GEMI Number : 84842902000
Training of electricians - installers of the National Electrical Contractors Association of Higher and Secondary Technical Education in the EMMIS facilities
With great interest, was completed on Saturday 4 June 2016 in EMMIS facilities, the training of National Electricians Contractors of Higher and Secondary Technical Education on “Transformers and other power and control products “.
The content of the training was designed in two (2) main parts:
The theoretical training of the participants about the operation , uses, applications, benefits and quality selection criteria of low voltage transformers , as well as a range of products that belongs in the power supply and control industry, such as voltage stabilizers, insulation monitors, temperature monitors, multifunction multimeters and network analyzers, industrial earth leakage relays and current transformers.
Live monitoring of low-voltage transformer production process – from the stage of raw materials until the completion of quality control – which strictly adheres to international standards and incorporates the corresponding expertise in manufacturing certified low-voltage transformers.
The training was delivered by the personnel of the respective EMMIS departments (Sales, Production, Quality Control & Technical Support) and lasted from 9.00am until 2.00pm.
The event was honored by the National Association of Retired Electricians which was represented by Mr. George Kissandrakis (President) and Mr. Lefteris Skaris (General Secretary).
All participants received the Seminar Confirmation of Participation.
Training of electricians - installers of the National Electrical Contractors Association of Higher and Secondary Technical Education in the EMMIS facilities